a. Parameter of machine part：
1) Type：WHZW6000
2) Working length：6000mm
3) Press head：6
4) Weight：4800kg
5) Pressing power：130kn
6) Bending range：0-1250
7) Depth of throat：800mm（Max. working width of material in clamp）
8) Folder low worktable：back and forth 27mm, with quad of 12.7mm can be knock down
9) Width of up and low worktable：28mm
10) Hinge：parallel four connected pole
11) Act component of worktable：hydraulic double oil cylinder
12) Circle time：Max. bending limit take about 12 seconds
13) Motor power of hydraulic station：11kw
14) Total power：11.5kw
15) Outline dimension（length×width×height）：7395×1842×1375mm
b. Parameter of slitting system：
1) Type：rotary blade
2) Diameter：Ø100mm
3) Material：W18Cr4V
4) Drive system：hydraulic motor and chain for transmission
5) Guiding device：fix linear rolling rail on low worktable of folder
6) Slitting speed：about 0.8m/second
7) Slitting distance: about 50mm of upper blade stand
c. Parameter of folding and slitting capability：
1) Max. bending thickness 1.2mm steel panel(yield intensity≤250Mpa)
2.0mm soft aluminum panel
0.8mm stainless steel
2) Max. bending length 6000mm
3) Max. slit thickness 1.2mm steel panel(yield intensity≤250Mpa)
2.0mm soft aluminum panel
0.8mm stainless steel
4) Min. folding dimension 10mm（panel thickness＜1.2mm)
20mm（panel thickness≥1.2mm）
d. Parameter of hydraulic power system:
1）Type：pressure compensate and load pressure induce system
2）Capability：11kw、150bar、40L/min
3）Capacity of oil tank：180L
e. Parameter of computer controlling system
1) System：industry PC and rotary encoder for controlling bending angle
2) Numerical control locating system：servo system to control bending length automatically
3) Operating table：operating display fixed on the swing arm, which has automatic and manual function
4) Angle programme：0-1250 with 10 as accuracy，input on the screen
5) Control of upper worktable：inching control by handspike and pedal on the controlling box
6) Control of low worktable：use operating pole when manual control, use button when automatic control
7) Slitting control：button for controlling ahead，stop and back
8) Emergency stop：long pedal for control

WHZW6000 numerical-control folder & slitting machine is designed for processing the metal panels, it is suit for the long workpiece. This machine is used for the ridge, cornice, door opening, window and so on, it also can use for processing metal plate of other industry.